CL600S+KZ25

Flow range: 0.59-6000mL/min, two working modes: flow mode and timed constant speed; industrial≠ touch screen and film button synchronous operation, simple, co¥nvenient and fast;

Category:

Email

sales3@ditrontech.com

    CL600S+KZ25

    • Product Description
    • Commodity name: CL600S+KZ25

    Flow range: 0.59-6000mL/min, two working modes: flow mode and ←timed constant speed; industrial touch screen and filγm button synchronous operation, simple, convenient and f∑ast;

    Product Introduction

    ◆ Two working modes: flow rate mode and timed constant speed mode;

    ◆ Simultaneous operation with industrial touch screen and membran♠e keypad, simple, convenient and fast;

    ◆ Suitable for high-precision liquid transfer ≤6000mL/min;

    ◆ Servo motor drive, effectively ensuring liquid transfer accuracy;

    ◆ Adaptable to various pump heads to meet different n↔eeds, including KZ25, DMD25, YZ15, YZ25 pump heads;

    ◆ Liquid volume accumulation, appointment filling, multiple schemes can be preset for easy access$;

    ◆ Multiple external control modes, including 0-5V, 0-10V, 4-20mA, 0-10KHz, RS485, external sΩignal start/stop control, etc;

    Typical Applications

    ◆ Industrial high-precision liquid transfer;

    ◆ Chemical reagent and medicine dispensing, such as ±diagnostic reagents and oral liquids;

    Control Panel

    ◆ Industrial touch screen combined with membrane keypad operation

    Flow rate mode, timed constant speed, 2 working modes

    Four physical buttons: scheme, full speed, direction, start/stop, for mδore convenient operation

     

    ◆ Flow Rate Mode

    Set the flow rate value, flow rate acceleration and deceleration functions, suitabl<e for continuous high-precision liquid transfer;

    Total liquid volume accumulation and total running ti♠me accumulation functions;

    Flow rate calibration function, input the measured flow rate value to complete& the flow rate calibration;

    Scheme storage and access function

    ◆ Timed Constant Speed Mode

    Set the flow rate value, running time, interval time, and number of run&s, suitable for timed constant speed liquid transfer;

    Total liquid volume accumulation and total running time acc±umulation functions;

    Flow rate calibration function, input the measured flow rate value to complete the ≥flow rate calibration;

    Scheme storage and access function

    Technical Parameters

    Driver Model CL600SCL350S
    Applicable Pump Heads KZ25, YZ15, YZ25 DMD25
    Flow Rate Range 0.59-6000mL/min0.09-4160mL/min
    Speed Range 0.2-600rpm0.2-350rpm
    Pump Head Features Suitable for large flow liquid transfer Special low-pulsation pump head, suitable for high-precision liquid transfer
    Working Mode Flow rate mode, timed constant speed
    Liquid Volume Accumulation Total liquid volume accumulation and reset function
    Time Accumulation Total running time accumulation and reset function
    Scheme Storage Save the current running scheme for easy access
    Flow Rate Calibration Input the measured flow rate for automatic calibration to achieve h♦igher precision liquid transfer
    Back Suction Speed Setting Set the back suction speed to prevent dripping after shutdown, speed r ange 10-300rpm
    Back Suction Angle Setting Set the back suction angle to prevent dripping after shutdown, angle range 10-720°, can be s"et to 0
    Screen Lock Function Lock the screen to prevent accidental touches or arbitrary para₩meter changes
    Full Speed Function Liquid quick filling and draining hose
    Direction Control Liquid transfer direction control
    Appointment Start Set the date and time for appointment start
    Timed Start Start at the set time
    Language Setting Chinese and English interface switching
    Restore Factory Settings Restore factory settings function
    Speed Control Accuracy Error ≤0.2%
    External Signal Input 0-5V, 0-10V, 4-20mA, 0-10KHz external signal speed regulation function (only f¶or flow rate mode)
    Start/Stop Control External signal start/stop control, optional switch and volt§age mode
    Foot Switch Optional foot switch to control start/stop
    Communication Function Uses Modbus RTU communication protocol
    Running Time 0.1s-9999.9Hr
    Interval Time 0.1s-9999.9Hr
    Operation Mode 4.3-inch industrial touch screen combined with membrane keypad
    Number of Runs 0-99999 times (0 for infinite loop)
    Working Environment Temperature 0-40℃, relative humidity <80%
    Applicable Power Supply AC90-260V, 50/60Hz
    Driver Dimensions 230x167x206mm
    Weight 5.5kg
    Protection Level IP31

    External Signal Control

    ◆ In flow mode, 0-5V, 0-10V, 4-20mA, 0-10KHz externalβ signal speed regulation;

    ◆ RS485 communication control, using Modbus RTU communication protocol>;

    ◆ Start/stop control, switch quantity or voltage signal control staδrt/stop, or foot switch control start/stop

    CL600B+YZ15-WK-2-X Copy

    Selection Guide

    Driver

    Applicable Pump Heads

    Number of pump head rollers

    Number of channels

    Tubing

    Speed range (RPM)

    Flow range (mL/min)

    CL600S

    KZ25

    3

    1,2

    15#

    0.2-600

    0.016-46.1

    24#

    0.054-178.1

    35#

    0.104-336.9

    36#

    0.172-556.2

    DMD25

    6

    1

    1.6×2.4

    0.2-350

    0.086-150.4

    3.2×2.4

    0.46-805

    2*15#

    0.86-1505

    2*24#

    1.37-2397

    2*35#

    1.68-2950

    2*36#

    2.38-4165

    Dimensions

Get a free product quote

Fill in your phone and E-mail information, and we will co<ntact you within one working day to solve your problems as soon as possible.