S100-11B+TH10
Category:
- Product Description
S100-11B+TH10
-
- Commodity name: S100-11B+TH10
Flow range: 0.006-41mL/min, suitable for micro-flow high-pre₽cision liquid delivery. Pump heads are available in 4-roller an"d 8-roller options; 4-roller pump heads have a slightly larger flow rate, while 8-roller ™pump heads have lower pulsation.
Product Introduction
◆ Flow range: 0.006-41mL/min, suitable for micro-flow high-pr↓ecision liquid delivery
◆ Pump head is available in 4-roller and 8-roller options; 4-roller pump head has a slightly l♠arger flow rate, while the 8-roller pump head has lower pulsation.
◆ Stepper motor drive, integrated structure◆ 15-speed BCD DIP switch speed control, or external contr$ol signal speed control
◆ Switch quantity control start and stop, switch quantity control forward and reverse rotation
◆ Flow accuracy up to ±1%
◆ 24V DC power supply, optional power adapter for 220V AC power supply
Tube Installation
◆ Manually pull the lever outward and rotate the pressure block assembly
◆ Install two beads on the tube to secure the tube and prevent slippage. Install the tube an d manually rotate the rollers to ensure the tube is ₹in the middle of the rollers.
◆ Rotate the pressure block assembly and engage the lever
Control Circuit
◆ 15-speed adjustment via BCD coded switch
◆ Set the BCD coded switch to "0" for external signal control
◆ Terminals 1 and 2 are the RS485 communication control input terminals; 1 is positive, 2 is negative.
◆ Terminals 3 and 4 are the external signal input terminals; 3 is positive, 4 is negative. External signals include: 0-10KHz, 0-5V, 0-10V, σ4-20mA (choose one).
◆ Terminals 5 and 7 control start and stop. When open or disconnected, the pump runs; when closed, the pump stops.
◆ Terminals 6 and 7 control direction. When open or ₹disconnected, the pump runs clockwise; when closed, the pump runs co★unter-clockwise.
◆ Terminals 8 and 9 are the power input terminals; 9 is ↓positive, 8 is negative. DC24V is recommended.
Technical Parameters
Product Model S100-11B+TH10 Applicable Pump Head TH10A (4-roller), TH10B (8-roller) CPU ARM Cortex-0 core, STM32 chip Motor Driver Chip Sanyo THB6128 driver chip Start/Stop Control Can control start and stop Direction Control Reversible, forward and reverse Internal Speed Control BCD DIP switch adjustment External Speed Control 0-10kHz pulse control or 0-5V, 0-10V, 4-20mA analog $signal control (choose one); 0-10KHz is standard. Internal Speed Range 1-100rpm, 15-speed adjustment; standard configuration is 5, 10, 15, 20, 25, 30®, 35, 40, 45, 50, 60, 70, 80, 90, 100rpm; customizable. External Speed Range 0-100rpm, speed resolution 0.1rpm, full range linear correspondence Communication Control RS485 communication control, using Modbus communication proto™col; communication control and other external control cannot coexist; choose one. Speed Error ≤±0.5% Adaptable Tubing 0.6×1，1×1, 2×1，2.4×0.8，3×1，0.38×0.86，0.76×0.86，1.02×0.86，1.6×0.8，2.06×0.86，2.79×α0.86，3.17×0.86，3.2×0.8 Start/Stop Control Start/Stop Control: Switch quantity control normally open con≤tact, peristaltic pump runs; contact closed (port 5 and 'port 7 short-circuited), peristaltic pump stops. Direction Control Direction Control: Switch quantity control normally open cont←act, peristaltic pump runs clockwise; normally closed contact (port 6 and port 7 short-c∑ircuited), peristaltic pump runs counter-clockwise. Applicable Power Supply 11.4-25.2V DC; or 100-240V AC (optional power adapter) 50/60H✔z Operating Environment 0-40℃, Relative Humidity: <80% Weight 540g Selection Guide
Product Model
Pump Head Roller Number
Optional Channels
Tubing
Speed Range (RPM)
Flow Range (mL/min)
Recommended Selection
S100-11B+TH10A
4
1
0.6×1
≤100
0.0027-2.7
High-precision micro-flow
Liquid delivery, slightly larger flow rate
1x1
0.0059-6.28
2x1
0.020-20.12
3x1
0.038-37.47
S100-11B+TH10B
8
1
0.6×1
≤100
0.0017-1.7
Suitable for lower volume, higher precision transmission, lower pulsation
1x1
0.0044-4.22
2x1
0.014-13.04
3x1
0.023-21.41
Dimensions
Get a free product quote
Fill in your phone and E-mail information, and we will contact you within one working εday to solve your problems as soon as possible.
