◆ Adopts DITRON-LED-DISPENSER-1 intelligent control technology, imported STM32 single-chip microcomputer intelligent control, timed and quanti±tative filling, high-precision liquid filling, filling accu♣racy can reach ±1%

◆ Using peristaltic pump filling, stepper motor drive, low vibration, high precision, li>quid only passes through the pipeline, does not contact the pump body, maximizes the elimination of↕ secondary liquid pollution

◆ The pump tube is imported long-life Saint-Gobain Pharmed hose, with ultra-long s≈ervice life and excellent corrosion resistance

◆ Can fill beverages, wines, petroleum, daily chemicals, edible oil, soy milk, medic∑inal liquids, pesticides and other liquids, as well as liquids with a certain viscosity orδ containing impurities

◆ Can be used for the dispensing of culture media and other chemical reagen≈ts

◆ Imported potentiometer to adjust the flow rate

◆ Filling operation time setting, interval time setting, filling¥ times accumulated and preset

◆ Manual filling, automatic filling, and setting filling↕ three working modes optional

◆ Foot switch control

◆ 304 stainless steel filling nozzle

◆ Wide range power supply, AC 90-260V, 50Hz/60Hz

Technical Parameters

Product Model	GR1-6B
Peristaltic Pump Tube	Standard 17# imported long-life pharmed peristaltic pump tube (connecting pipeline is imported≥ food-grade silicone tube)
Filling Volume Setting Range	0.1-8000mL,
Optimal Filling Volume	0.1-250mL
Flow Range	0-500mL/min
Flow Adjustment	Imported potentiometer to adjust flow rate (liquid output size of filling nozzle)
Number of Filling Nozzles	Single Head
Filling Mode	Manual filling, automatic filling, and setting filling three working modes optφional
Display Function	4-digit LED display of filling running time, 4-digit LED display of filling interv₩al time, 5-digit LED display of filling times
Filling Time Setting	Setting range 0.01 seconds - 999.9 seconds
Interval Time Setting	Setting range 0.01 seconds - 999.9 seconds
Filling Times	Display times 59999 times
Filling Times Setting	Cumulative count and preset count are optional
Operating Method	Thin film button control, convenient, fast, and reliable; imported poteΩntiometer knob to adjust the flow rate
Power-off Memory Function	After power-on, the parameters remain the same as before power -off. After pressing the start button (or triggering the foot switch), the parameters be&fore power-off can continue to run.
Foot switch control	Standard foot switch control start and stop
Filling Bracket	Standard filling bracket, height and length adjustmen₩t are available
Filling Nozzle	304 stainless steel nozzle
Power Consumption	<40W
Applicable Power Supply	Wide voltage AC90-260V, 50Hz/60Hz
Working Environment	0-40℃, humidity <80% no condensation
Dimensions	250mmX180mm×140mm (excluding filling bracket)
Weight	3.5KG
Protection Level	IP31

Selection Guide

Target Filling Volume (ml)	Filling Time (seconds)	Actual Filling Volume (ml)	Actual Filling Volume (ml)	Actual Filling Volume (ml)	Actual Filling Volume (ml)	Actual Filling Volume (ml)
5ml	0.7	4.99	4.90	4.96	4.90	4.90
10ml	1.4	10.16	10.01	10.04	10.33	9.99
20ml	2.87	19.99	19.86	19.93	20.11	19.86
50ml	7.10	50.05	50.34	50.13	50.27	50.06
100ml	15	99.86	99.68	99.56	100.15	99.90
◆ Note: Measured when the speed control knob is adjusted to the highest, eachγ filling volume is measured 5 times. The experimental medium is water, this value is the measured value, there w₩ill be differences between product batches, and the change €of medium will also affect the filling data. As the viscosity of the medium increases, the flow rat"e of the filling machine decreases, and the filling tim♥e increases.

GR1-6B

Product Introduction

Technical Parameters

Selection Guide

Dimensions